Honeywell WiFi Thermostat Driver C
Preferences:
- Username - Enter your Username for Honeywell's MyTotalConnectComfort site.
- Password - Enter your Password for Honeywell's MyTotalConnectComfort site.
- Enable Debug Logging - Allow Debug messages to be logged. This selection is for all Child devices and can add a noticeable quantity of logs. It is automatically disabled in 30 minutes.
- Descriptive Text logging - All drivers should log information that allows you to recognize it's working or not. Beyond that minimum, additional logging might be desired. Enable this if you want more than the absolute minimum.
- Device ID - Login to MyTotalConnectComfort site. When viewing the Thermostat mockup, inspect the URL and see the 6-8 numbers that are your Thermostat's ID.
- Whole house steam humidifier (optional) - If your Thermostat has this option, enable it.
- Outdoor temperature sensor (optional) - If your Thermostat has this option, enable it.
- Humidity sensor (optional) - If your Thermostat has this option, enable it.
- Setpoints be temporary or permanent - When you change a setpoint (either heat or cool) if they are temporary, then the Thermostat will revert to using the Schedule. If permanent, then a setpoint can't be changed by the schedule.
- Poll Interval - Honeywell servers limit the number of messages and Polling interval should be set as high as possible and still achieve your goals. Times under 10 mins are going to get denied more often than times above 10.
- Descriptive Text logging - All drivers should log information that allows you to recognize it's working or not. Beyond that minimum, additional logging might be desired. Enable this if you want more than the absolute minimum.